所有产品分类
日本FSG板载编程器AF9201/AF9201C
日本FSG板载编程器AF9201/AF9201C
AF9201/01C
AF9201/ 01C On-board programmer
Features
Serial programming of various Flash microcontrollers, Serial and SPI Flash
The on-board programmer AF9201 and AF9201C are high-speed programmers that support board-mounted flash microcontrollers and SPI flash.
・Large capacity buffer memory
· Buffer memory 1 Gbit (dedicated algorithm card)
· Memory expansion is not required and main SPI flash can be supported
・Hardware design capable of high-speed writing to SPI flash
· Supports single, dual, quad mode
· High-speed writing that does not disturb the device capability value
・Serial programming of various Flash microcontrollers, Serial and SPI Flash
・Large capacity buffer memory
· Buffer memory 1 Gbit (dedicated algorithm card)
· Memory expansion is not required and main SPI flash can be supported
・Hardware design capable of high-speed writing to SPI flash
· Supports single, dual, quad mode
· High-speed writing that does not disturb the device capability value
■ Program time (including VERIFY) / 64 Mbit SPI Flash
| Conventional machine | 142 seconds |
| AF9201/AF9201C | 35 seconds |
＊Communication speed: 3 MHz for conventional machine, AF 9201 50 MHz. Depends on device, environment
Easy to use interface
Equivalent function and operability as AF9101 / 03
Remote operation from USB connected PC can be separated, PC can be separated, continuous operation can be done with only single key.
External control interface (AF9201 only)
By using the dedicated external control interface, control operation by external trigger signal and result output to external are possible.
(System example)
・Online programming linked to FA devices such as sequencers and various controllers
・ Automatic control of data programming and function inspection just before assembly
Example for PC remote
Options
| Dedicated algorithm card | 1 type compatible : TECFM-1G-20 4 types compatible : TECFM-1G-20-4 * One unit of the programmer is provided with one dedicated algorithm card (TECFM-1G-20). * Only one series can be registered to one algorithm card. Another algorithm card is required for additional device support. |
| Programming board for evaluation | By connecting to AF9201, chip programming to SPI flash of SOP16 pin (300mil), SOP8 pin (200mil), SOP8 pin (150mil) is possible. *It can also be used with AF9201C. |
| Power supply booster box | High voltage and various control signals can be output for each device specification. |
Programming board for evaluation
Specification
| AF9201 | ||
| Buffer Memory | Dedicated algorithm card standard 1 Gbit (128 Mbytes) * Only one series can be registered with one algorithm card. A separate CF card is required for additional device support. | |
| Concurrent programming | 1 piece only | |
| Support device | Flash ROMs, Flash microcontrollers, Serial Flash ROMs of various manufacturers supporting SPI, UART, I2C, JTAG, SWD or CLK sync | |
| Program power supply |
| |
| External Interface |
|
|
| Operating Voltages | AC adapter AC 100 to 240 V This instrument DC 7 V | |
| Power frequency | 50～60Hz | |
| Power consumption | Up to 3 VA | |
| Size (D x W x H) | 100 x 120 x 22 mm | |
| Weight | 210 g (excluding attached items) | |
| Accessories | ■ Standard accessories Dedicated algorithm card, USB cable, target cable, External control interface cable, PC control software ■The master file name can be displayed on the control software and the main unit LCD display. | ■ Standard accessories Dedicated algorithm card, USB cable, target cable, PC control software ■The master file name cannot be displayed on the control software and the main unit LCD display. |
| Options |
|
|
| Warranty | 1 year | |
友情链接Link
